How to Install LuxFit™ Shutters (Easy-Fit No-Drill)

LuxFit™ shutters are designed for tool-free installation using a unique clip-in system. No screws, no drilling — just easy, clean mounting inside your uPVC window frame.

Tools Needed

• Credit card (as spacer)
• Step stool (if needed)
• Clean cloth (to wipe surfaces)

Step 1: Insert the Brackets

• Use a credit card to determine correct bracket depth.
• Slide each bracket gently into the gasket seal — start with bottom corners, then top.

Step 2: Clip In the Shutters

• Align the shutter frame with the bottom brackets and push down to clip in.
• Press the top of the frame into the upper brackets until it clicks securely.

Step 3: Final Checks

• Ensure the shutter is fully engaged in all brackets.
• Open and close the louvres to test functionality and clearance.

Your LuxFit™ shutters are now installed. Need help? Contact our support team via online chat.

How to Install LuxCore™ Shutters (Composite)

LuxCore™ shutters are engineered for strong, reliable performance with an easy inside-mount installation. Follow these steps for best results.

Tools Needed

• Power drill
• Spirit level
• Steel tape measure
• Pencil
• Screwdriver
• Wall plugs and screws (included)

Step 1: Assemble the Frame

• Connect frame corners using provided connectors.
• Ensure frame is square and fits cleanly inside the recess.

Step 2: Position the Frame

• Place the frame inside the recess.
• Use a spirit level to ensure perfect alignment.

Step 3: Fix the Frame

• Pre-drill through the marked points in the frame.
• Insert screws into wall plugs and secure the frame lightly at first.

Step 4: Attach the Shutter Panels

• Align and fix panels to hinges within the frame.
• Check for smooth opening and consistent gaps.

Step 5: Final Adjustments

• Tighten all frame screws once aligned.
• Attach cover strips or caps to conceal visible fixings.

Your LuxCore™ shutters are ready to use — enjoy classic style with modern strength. Need help? Contact our support team via online chat.

How to Install LuxWood™ Shutters (Wood + ABS)

LuxWood™ shutters combine the warmth of real wood with the durability of ABS protection. They are designed for confident inside-mount installation using a side-fix or Z-frame method.

Tools Needed

• Power drill
• Spirit level
• Steel tape measure
• Pencil
• Screwdriver
• Wall plugs and screws (included)

Step 1: Assemble the Frame

• Connect the frame corners using the provided clips or corner keys.
• Lay it flat and check that the frame is square before fitting.

Step 2: Position the Frame

• Place the assembled frame inside the recess.
• Use a spirit level to ensure vertical and horizontal alignment.

Step 3: Fix the Frame

• Mark drill points through the frame’s pre-drilled holes.
• Pre-drill and install wall plugs where needed, then loosely screw in the frame.

Step 4: Attach the Shutter Panels

• Mount each panel to the frame using the provided hinges.
• Check alignment and operation before fully tightening the hinges.

Step 5: Finishing Touches

• Once everything is properly aligned, fully tighten all screws.
• Apply included cover strips or caps to hide visible fixings.

Your LuxWood™ shutters are now installed — enjoy the luxury of real wood, built to last. Need help? Contact our support team via online chat.